澳门新浦京8814com-新葡萄京官网网址-首页

Welcome to visit the official website of yuyao jiting tool factory!

1508465722104864.pngGood quality            1508465728303933.pngGood material            1508465734676674.pngGood service

Tungsten steel grinding head

Contact

Tel:0574-62156030

Fax:0574-62151687

QQ:1439004429

Phone:13605844646

E-mail:wsinbjiting@126.com

www.yyjtrj.com

Add: No. 50, white road, simen town, yuyao city



The problem of poor fracture toughness of carbide rotary file is expected to be solved

Your current location: Home page >> News >> Company news

The problem of poor fracture toughness of carbide rotary file is expected to be solved

Date of release:2019-09-19 Author:admin Click:

    Because the fracture toughness of carbide rotary file is not good, it is difficult to be used in some machining occasions (such as micro-deep hole drilling) that require high toughness of the tool.Whisker toughening and reinforcing technology is an effective way to solve this problem.

     


关于硬质合金旋转锉刀具材料断裂韧性差的问题有望得到解决


  The energy of crack propagation can be absorbed by adding whiskers to the rotary file of cemented carbide.The toughening mechanism of whisker is as follows: (1) whisker pulling and toughening: when the whisker is pulled out from the matrix under the action of external load, part of the energy of external load is consumed due to interface friction, so as to achieve the purpose of toughening. The toughening effect is affected by the whisker and interface sliding resistance.There must be sufficient binding force between the whisker and the matrix interface to effectively transfer the external load to the whisker, but the binding force cannot be too large to maintain sufficient pulling length.(2) crack deflection toughening: when the elastic modulus at the crack tip is larger than the second phase of the matrix, the crack will deviate from the original direction and expand along the two-phase interface or the matrix.Because the non-plane fracture of the crack has a larger fracture surface than the plane fracture, it can absorb more external energy and play a toughening role.The addition of whiskers or particles with high elastic modulus to the matrix can cause crack deflection and toughening mechanism.(3) whisker bridging toughening: when the matrix is broken, the whisker can bear the external load and act as a bridge connecting the crack surface.Bridged whiskers can apply a force on the substrate to close cracks and consume the work of the external load, thus improving the toughness of the material.

关于硬质合金旋转锉刀具材料断裂韧性差的问题有望得到解决

    

The address of this article:/en/news/410.html

Key word:硬质合金旋转锉厂家,硬质合金旋转锉规格,硬质合金旋转锉价格

Recently browse:

Telephone
13605844646
Add: No. 50, bai lu tou, simen town, yuyao city, zhejiang province

Copyright ? /en/ Yuyao jiting cutting tool factory Specializing inCarbide rotary file,Alloy grinding head,Tungsten steel grinding head,Welcome to inquire!
Powered by XiangyunTechnical Support:Huaqi

3T`}0ULY[`4@NJ}IHALETP2.png

  • Service
    QQQQ
  • number
    13605844646
  • Message
  • web site
  • Online Service

    澳门新浦京8814com|新葡萄京官网网址

    XML 地图 | Sitemap 地图